Specifications:

• Grade - K05/D05
  • Application - hard cast iron, plastic, porcelain, fiber, cutting with small chip sections
• Grade - K10/D1
  • Application - grey cast iron over HB 220, cutting with medium or small chip sections
• Grade - K20/D2
  • Application - grey cast iron below HB 220, wood, non-ferrous metals, turning with medium or large chip sections
• Grade - K30/A4
  • Application - low hardness cast iron, wood, non-ferrous metals, turning with large chip sections
• Grade - K40/D3
  • Application - powder compacting dies, wire (pipe) drawing dies, heavy interrupted cutting and high feed rate turning
• Grade - K50/D4
  • Application - deep drawing dies, punching dies, mining tools, extra heavy duty turning tools
• Grade - G30/D5
  • Application - cut-off dices, trimming dies
• Grade - G35/D55
  • Application - trimming dies, punching dies
• Grade - G40/D6
  • Application - punching dies, heading dies
• Grade - G45/DH
  • Application - heading dies, extrusion dies, heavy punching dies
• Grade - G50/D7
  • Application - nut forming die nibs, extra heavy punching dies
• Grade G60/DX
  • Application - special nut forming die nibs, super extra heavy punching dies
• Grade P10/M10
  • Application - steel, turning with medium or small chip sections
• Grade P20/M20
  • Application - steel, turning with medium or large chip sections
• Grade P40
  • steel, turning with large chip sections